Welcome to the official website of Shenzhen Xinbit Electronic Technology Co., Ltd.!
Products
current location:Home>Products>Sub board machine
Curve dividing machine
  • Curve dividing machine
  • Introduction
  • Parameter
Equipment use :                                                     

Various irregular contiguous (e.g., arcuate) of the PCB board and the stamp hole PCB board dividing

Brief introduction of features :

1. Programmable program control system supports point, straight, L -shaped, arc, circular and other path programming methods .

   Yield while maintaining high precision .

high-quality axle system allows the system to rapid acceleration and deceleration reducing the time period, to improve raw 3 the motor spindle, the core cutter hardware using high-quality brand, to ensure high performance and high rigidity .

manual handling of the workpiece.

5. It can cut continuously without interruption during loading and unloading of workpieces .

the short-contact knife slitting, the inner stress reaches 160. [mu] ST or less, to avoid cracking of tin solder and precision

   The parts are damaged.

7. The minimum distance between the edge of the V groove and the electronic components can be up to 0.3mm , and the maximum height of the board components

   The degree can reach 60mm .

the blade gap is adjusted by the height adjusting screw easily .

the moving carriage optional.
image.png

Contact: Mr. Shi 13798430013

Contact: Mr. He 13528705402

Phone: 0755-27349620

Fax: 0755-27382481

E-mail: sdx@xinbite.com

  • QR code

Copyright 2020 Shenzhen Xinbite Electronic Technology Co., Ltd.     粤ICP备20063018号