Cutting and splitting of glass fiber and resin circuit boards with V-CUT
Introduction
1 , the upper blade is a circular blade, the knife blade is elongated, the material firmly using Japanese SKH7 ;
2 , the linear displacement move the knife, the knife is fixed;
3 , take the knife cutting, smooth split, reduce the stress generated, to prevent the solder joint cracking ;
4. The distance between the upper and lower blades is adjustable to adapt to V-CUT of different depths ;
. 5 , the PLC program control system, high stability;
6 , with 100mm to 400mm total 4 length stroke (special order can be extended);
7. Two cutting speeds are optional;
8. Exclusively designed jog and linkage collection functions;
9. Infrared safety light curtain and emergency button to ensure absolute safety during use;
10. Conveyor belt can be installed.
Equipment configuration and parameters
Tool material: Japan SKH7
Sheet metal process: high temperature powder spraying / surface anode / hard chrome
Electric control: Omron / Mitsubishi
Power source: 220VAC 50HZ
Work rate: 140W
Shape Size: L 72 0 × W is 42 is 0 × H 46 is 0mm
Heavy volume: 72Kg
Sub-board thickness: 0.5~3mm
The material of the circuit board to be cut: glass fiber board, resin version
Contact: Mr. Shi 13798430013
Contact: Mr. Tian 13528705402
Phone: 0755-27349620
Fax: 0755-27382481
E-mail: sdx@xinbite.com
QR code