Equipment use
The body of the braid element wears the sleeve, and the cut foot is formed
Introduction
1. The braided material is accurately moved by the needle timing belt , and the moving position is controlled by a stepping motor ;
2. Tray-mounted heat-shrinkable tubing is rolled and fed by rubber wheels , the length of the casing is controlled by a stepping motor, and the length of the casing is adjustable ;
3. After the heat-shrinkable tube is sleeved, the position of the heat-shrinkable tube on the material shall be ensured by the subsequent correction and the positioning station ;
4. The motor is controlled to move to the back shrinking station ;
5, there are three thermal stations, during running fast continued for heat-shrinkable sleeve be heated ;
6. After the heat shrinking is completed, enter the forming and cutting station;
7. PLC control system , all adjustable data can be operated on the touch screen .
Equipment configuration and parameters
Tool material: Japan SKD11
Electric control: Omron / Mitsubishi
Power rate : 1200W
Power source: 220VAC 50HZ
Air source: 5-7 Mpa
Shape Size: L1000xW750xH1450mm
Heavy volume: 165kg
Processing efficiency: 2400-3600 pcs/ H
Contact: Mr. Shi 13798430013
Contact: Mr. Tian 13528705402
Phone: 0755-27349620
Fax: 0755-27382481
E-mail: sdx@xinbite.com
QR code