Equipment use
Axial components such as braid and spare parts resistance /diode, horizontal double K forming and cutting feet
Introduction
1. The combination of gears, cams, groove wheels and dial wheels is a fully mechanical structure;
2. The bulk materials are manually put into the S-shaped arrangement down track and sent to the host;
3. The braided material is fed in through the combination of the hanging gear rolling round knife, and the paper tape is cut. After the second cut, the components are sequentially sent to the mold structure from the index plate to complete the horizontal bending and double K foot forming. stripper ;
4. Motor driven, fixed speed ;
5. With automatic and inching options;
6. The span and foot length are adjustable , and the height of the frame is fixed;
Equipment configuration and parameters
Tool material: Japan SKD11
Sheet metal process: high temperature powder spraying / surface anode / hard chrome
Electric control: Omron / West Germany
Motor power : 120W
Power source: 220VAC / 50HZ
Shape Size: L850xW560xH760mm
Heavy volume: 95Kg
Processing efficiency: 6600 pcs/ H
Contact: Mr. Shi 13798430013
Contact: Mr. Tian 13528705402
Phone: 0755-27349620
Fax: 0755-27382481
E-mail: sdx@xinbite.com
QR code