Equipment use
Bulk and braided resistance /diode and other axial components vertical K-foot forming and cutting
Introduction
1. The combination of gears, cams, groove wheels and dial wheels is a fully mechanical structure;
2. Bulk materials are sent to the main engine through a vibrating plate and an S-shaped arrangement down track;
3. The braided material is fed in through the combination of the hanging gear rolling round knife, and the paper tape is cut. After the second cut, the components are sequentially sent to the mold structure from the index plate to complete the vertical bending foot, K foot forming, and back Material ;
4. Motor driven, fixed speed ;
5. With automatic and inching options;
6. The foot length is adjustable, but the span is not adjustable;
Equipment configuration and parameters
Tool material: Japan SKD11
Sheet metal process: high temperature powder spraying / surface anode / hard chrome
Electric control: Omron / West Germany
Motor power : 120W
Power source: 220VAC / 50HZ
Shape Size: L550xW450xH420mm
Heavy quantity: 110Kg
Processing efficiency: 6600 pcs/ H
Contact: Mr. Shi 13798430013
Contact: Mr. Tian 13528705402
Phone: 0755-27349620
Fax: 0755-27382481
E-mail: sdx@xinbite.com
QR code